Standard precision racks and pinions

MIJNO  manufactures precision racks and pinions following you drawing, from precision class ISO / DIN 9 to ISO / DIN 5 (featuring ground teeth) and in a variety of materials.

Below you will find our 5 ranges of racks. All of them are manufactured at MIJNO France. These ranges usually cover most of your needs for precision racks and pinions.

Those models follow square section, section = 10 x module and adhere to industry standards (interchangeable).

Please click on "more details" below for product information, and contact us directly for 3D drawings.

Our Research and Development department is here to assist you. Do not hesitate to contact MIJNO to confirm your gear calculation.We can create a custom product to meet your specialized needs.

  Teeth Material Precision class
(MM/M)

(MM)
First Straight

C45
(600 N/mm2)

ISO 8 (AGMA 8 to 9) 0.06 -
First Helical C45
(600 N/mm2)
ISO 8 (AGMA 8 to 9) 0.06 -
Classic Straight C45
(600 N/mm2)
ISO 7 (AGMA 9 to 10) 0.05 0.05
Classic Helical C45
(600 N/mm2)
ISO 7 (AGMA 9 to 10) 0.05 0.05
Gold Straight 40CMD8
(1000 N/mm2)
ISO 7 (AGMA 9 to 10) 0.04 0.03
Gold Helical 40CMD8
(1000 N/mm2)
ISO 7 (AGMA 9 to 10) 0.04 0.03
Platinium Straight C45 (600 N/mm2),
teeth 52-58 HRC
ISO 6 (AGMA 11 to 12) 0.02 0.02
Platinium Helical C45 (600 N/mm2),
teeth 52-58 HRC
ISO 6 (AGMA 11 to 12) 0.02 0.02
Carat Straight 40CMD8
(1000 N/mm2)
ISO 5 (AGMA 13 to 14) 0.02 0.015
Carat Helical 40CMD8
(1000 N/mm2)
ISO 5 (AGMA 13 to 14) 0.02 0.015